Our certifications

TRANSPORT CANADA (AMO 306-91)

DAO approval # 13-Q-03 (Responsible Jatinder Manan)
CAR573 The maintenance of aeronautical products, and
holds ratings in the following categories:
NDT: Liquid Penetrant Inspection

Structures: Sheet Metal Structures
Tubular Structures
Welding: Arc Welding
Gas Welding
Resistance Welding (Spot and Seam)

CAR561 Manufacture and Certification of Aeronautical Product
AS9100C & ISO 9001:2008

EASA – EUROPEAN AVIATION SAFETY AGENCY
Approval ID: EASA 145-7006

ANAC – BRAZILIAN CIVIL AVIATION AUTHORITY

NADCAP
Welding
Coatings
Chemical Processing
NDT

CONTROLLED GOODS PROGRAM (CGP)
CG10438 Registration with the Controlled Goods Program

CCAA (Canadian Council for Aviation & Aerospace)

ROLLS ROYCE
Fabrication Shop:
RPS 184 Fusion Welding
RPS 300 Combustion Flame Deposition
RPS 367 Corrosion Protection of Components During Manufacture and Storage
RPS 386 Abrasive Blasting
RPS 392 Plasma Flame Deposition
RPS 427 Flame disposition of Abradable coatings
RPS 576 Cleaning & Degreasing using non-halogenated organic solvents
RPS 629 High Velocity Plasma Flame Deposition
RPS 643 High Velocity Combustion Flame Deposition
RPS 679 Fusion welding of components with use with land-based and marine turbines and related equipment
RPS 709 Visual Inspection
MSRR 9969 Procedural Requirements for the hardness testing of metals Process shop

Process Shop:
FRS3831 Repair Planning Rigid Tubes
FRS5217 Repair Planning Rigid Tubes
FRS5217S Repair Planning Rigid Tubes
TARI5107S LP Compressor OGV Repair
TSD594J/OP101 Non Aqueous Vapor and Liquid Degreasing
TSD594J/OP104 Abrasive Blasting for Cleaning
TSD594J/OP322 Application of Low Heat Resisting stoving enamel
TSD594J /OP341 Application of High Heat Resisting Aluminum stoving enamel
TSD594J /OP356 Application of Polyimide Coating
TSD594J/OP404 High and Intermediate and Low Temperature Brazing
TSD594J/OP409 Argon Arc Welding Repairs
TSD594J/OP704 Application of Sprayed Metal and Ceramic Coatings

LOCKHEED MARTIN
STP 55-104 Fusion Welding
STP 55-005 Resistance Welding (Limited to Class “A” and “B”)
MIL-STD-6866/ Penetrant Inspection
ASTM-E-1417
STP53-201/LCP72-1068 Penetrant Inspection
1068
C-0567 Penetrant Inspection
AMS-C-5541/MIL-DTL-5541 Type I, Class 1A and Class 3 Chem Film
DTL-5541
PS0170 Cleaning (Alkaline/Acid Metal Removal Methods Only)
C-0170 Cleaning (Alkaline/Acid Metal Removal Methods Only)
STP57-301 Aluminum Alloys – Alkaline/Acid Metal Removal Methods
C-0498 Chem Film
P-3/CP-140 Hologram Products

PRATT & WHITNEY
Plasma Coating:
CPW 33-5, 13, 16, 18, 35, 37 and 80 on Steel, Nickel & Cobalt Alloys
CPW 33-5, 13 and 16 on Titanium
CPW 385
CPW 518-1 and 2

Controlling Document FC-35
CPW672 Coating, Plasma Spray, Oxidation Protection and Thermal Barrier
Approval of the facility for the TBC Restoration on small exit Duct of the PT6 PW100 inner and other CC lines.

Fusion Welding:
CPW 24-22 Process “A’’ (Tack Weld Only)
(Controlling Document YC-3)

BOMBARDIER AEROSPACE
BAERD-GEN-018-1B WET CHEMISTRY, TREATMENT OF SOLUTIONS ANDWATERS PERFORMED BY CLASSICAL NON-INSTRUMENTAL TECHNIQUES SUCH AS GRAVIMETRIC, VOLUMETRIC, COLORMETRIC OR TITRATION
BAERD-GEN-018-3B METALLOGRAPHIC EXAMINATION OF ALUMINUM ALLOYS
BAERD-GEN-018-3E WELDING EVALUATION
BAPS 132-03 SWAGING OF TUBES
BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER
BAPS 138-43 APPLICATION OF FLUID RESISTANT PRIMER Limitation:
BAPS 138-44 APPL’N OF FLUID RESISTANT POLYURETHANE COATING
BAPS 138-44 APPL’N OF FLUID RESISTANT POLYURETHANE COATING
BAPS 145-002 ELECTRICAL BONDING OF AIRCRAFT
BAPS 150-003 INSTALLATION OF SAFETYING DEVICES
BAPS 150-003 INSTALLATION OF SAFETYING DEVICES
BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS
BAPS 151-001 INSTALLATION OF CONVENTIONAL RIVETS
BAPS 157-26 SPRAY APPLICATION OF BAMS 565-010 INTEGRAL FUEL TANK COATING
BAPS 157-28 PRESSURE & ENVIRONMENTAL SEALING
BAPS 160-20 CHEMICAL CONVERSION TREATMENT FOR ALUMINIUM ALLOYS
BAPS 160-40 CHEMICAL CONDUCTIVE CONVERSION TREATMENT FOR ALUMINIUM ALLOYS
BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS
BAPS 168-013 HARDNESS AND ELECTRICAL CONDUCTIVITY TESTING OF METALS
BAPS 172-009 SILVER TORCH BRAZING
BAPS 172-010 SEAM WELDING
BAPS 172-11 SPOT WELDING
BAPS 172-34 FUSION WELDING
BAPS 174-02 FABRICATION OF PLUMBING LINES
BAPS 175-004 RETENTION OF BEARING BY PRESS SWAGING
BAPS 175-005 INSTALLATION OF INTERFERENCE FIT BUSHINGS
BAPS 176-02 FLUORESCENT PENETRANT INSPECTION
BAPS 180-001 ALKALINE CLEANING
BAPS 180-11 CLEANING AND DEOXIDIZING COPPER AND COPPER ALLOYS
BAPS 180-15 PASSIVATION OF CORROSION RESISTANT STEEL
BAPS 180-30 ALKALINE ETCHING OF ALUMINUM ALLOYS
BAPS 180-31 CLEANING AND DEOXIDIZING CORROSION AND HEAT RESISTANT ALLOYS AND TITANIUM ALLOYS
BAPS 180-32 ACID CLEANING AND DEOXIDIZING ALUMINUM ALLOYS CAPTIVE LABORATORY
BAPS 185-000 GRINDING OF STEEL PARTS
BAPS 185-01 BARREL AND VIBRATORY FINISHING
BAPS 188-02 COLD WORKING OF HOLES

Captive Laboratory
PPS 12.04 INSTALLATION OF INTERFERENCE FIT BEARINGS AND BUSHINGS USING LIQUID NITROGEN
PPS 20.03 PENETRANT FLAW DETECTION
PPS 20.07 CONDUCTIVITY TESTING
PPS 20.08 HARDNESS TESTING Specification Controlled with Limitations:
PPS 24.04 THERMAL SPRAY DEPOSITION COATINGS
PPS 31.02 CLEANING PROCESSES OF ALUMINUM
PPS 31.09 CLEANING OF TITANIUM
PPS 32.01 CROMATE CONVERSION COATING
PPS 32.02 MANUAL APPLICATION OF CHEMICAL CONVERSION COATINGS
PPS 34.03 APPLICATION OF POLYURETHANE ENAMEL (F24 & F37)
PPS 34.08 EPOXY PRIME
PPS 37.03 FUSION WELDING OF ALUMINUM AND ALUMINUM ALLOYS –
PPS 37.04 FUSION WELDING OF FERROUS AND NICKEL ALLOYS –
PPS 37.05 FUSION WELDING OF TITANIUM –
PPS 37.06 TESTING AND APPROVAL OF AIRCRAFT WELDERS
PPS 37.10 REQUIREMENTS FOR FUSION WELDS

Messier Dowty
Approval AMS 2447-4

Horizon Air
Limitation AS Specification

QA System meet C.A.S.E. 1A Requirements

Many other customer approvals for Repair and Overhaul.

Requirements met for the following specifications:

ASTM E1417_E1417M – Standard Practice for Liquid Penetrant Testing
AWS C3.4M_C3.4 – Specification for Torch Brazing
AWS D17.1_D17.1M – Specification for Fusion Welding for Aerospace Applications
AWS D17.2_D17.2M – Specification for Resistance Welding for Aerospace Applications
AMS 2447 – Coating, Thermal Spray High Velocity Oxygen Fuel Process

L3 COMMUNICATIONS
MPI 172-009 Silver Torch Brazing
MPI 172-034 Fusion welding
MPI 174-002 Fabrication of Plumbing Lines _Limited to Cutting Tubes Only
MPI 176-002 Fluorescent Penetrant Inspection
MPI 180-001 Alkaline Cleaning- With Deviation D000-0096
MPI 180-015 Passivation Of Corrosion Resistant Steel
MPI 180-030 Alkaline Etching of Aluminum Alloys
MPI 180-031 Cleaning and Deoxidizing of Corrosion Heat Resistant Alloys and Titanium Alloys
MPI 180-032 Acid Cleaning and Deoxidizing Aluminum Alloys

VIKING
VPS 37.01 Resistance Welding Aluminum Alloys
VPS 37.02 Resistance Welding of Non-Hardening Steels.
VPS 37.03 Fusion Welding of Aluminum Alloys Using the.
VPS 37.04 Fusion Welding of Ferrous and Nickel Alloys
VPS 37.05 Fusion Welding of Titanium
VPS 37.06 Testing and Approval of Aircraft Fusion Welders
VPS 37.10 Requirements for Fusion Welds

AEROSPATIALE A330/A340 PROGRAM
MPS 250-201 IDENTIFICATION OF AIRCRAFT PARTS AND ASSEMBLIES
MPS 250-303 HARDNESS & ELECTRICAL CONDUCTIVITY TESTING OF METALS